ONLINE HELPFOR WINDEV, WEBDEV AND WINDEV MOBILE
List of detected Wi-Fi access points separated by CR characters (Carriage Return),Empty string ("") if no Wi-Fi access point was detected. The ErrorOccurred variable is used to find out whether an error occurred while detecting the access points. ErrorInfo returns more details about the problem.For each network, a set of information is returned in the following format:
<Identifier> + TAB + <SSID> + TAB + <BSSID> + TAB + <Security> + TAB + <Signal Power>
where: <Identifier> : Identifier of the network associated with the access point, empty string ("") if the access point corresponds to no network configured on the device.<SSID>: SSID (Service Set Identifier) of the Wi-Fi network associated with the access point. <BSSID>: BSSID (Basic Service Set Identifier) of access point <Security>: Type of security used by the Wi-Fi network: wifiSecurityNoneNo security is used.wifiSecurityWEPSecurity based on a WEP key (Wired Equivalent Privacy)wifiSecurityWPASecurity that is using the WPA mechanism (Wi-Fi Protected Access).wifiSecurityWPA2Security that is using the WPA2 mechanism (Wi-Fi Protected Access).wifiSecurityWPA_EAPSecurity that is using the WPA mechanism (Wi-Fi Protected Access) and the EAP mechanism (Extensible Authentication Protocol).wifiSecurityIEEE8021XSecurity that is using the IEEE 802.1x standard.<Power of Signal>: Power of signal expressed in dBm (decibel per milliwatt).
Maximum duration of detection in hundredths of a second. An error occurs if this time-out ends before the end of detection. If this time-out is not specified or if it is set to 0, no limitation will be applied to the duration.This parameter can correspond to: an integer corresponding to the number of hundredths of a second,a Duration variable,Versions 23 and laterthe direct indication of duration (1 s or 10 ms for example). New in version 23the direct indication of duration (1 s or 10 ms for example). the direct indication of duration (1 s or 10 ms for example).
Last update: 03/17/2018
Send a report |
Search in progress...
J'accepte les termes de la licence
All you have to do is configure your product as follows: