Home | Sign in | English EN
  • WiFi connection information
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WindowsLinuxPHPWEBDEV - Browser code
AndroidAndroid Widget iPhone/iPadIOS WidgetApple WatchMac CatalystUniversal Windows 10 App
Stored procedures
Returns information regarding the current connection to data on the mobile network.
Remark: This function cannot be used in the simulator and it will return 0 in this case.
// Activate the Wi-Fi if the signal intensity is strong enough to access the data
// via the mobile network
IF Val(MobileNetworkConnectionInfo(networkGSMSignal)) <= 20 _AND_ WiFiStatus() <> wifiEnabled THEN
IF YesNo("The intensity of the GSM signal is not sufficient. Enable the Wi-Fi?") THEN
<Result> = MobileNetworkConnectionInfo(<Type of information>)
<Result>: Character string
  • Requested information.
  • If several types of information are requested, each type of information is separated by a CR character (Carriage Return).
  • The order in which the information is returned (if requested) is as follows:
    1. <Type of network>
    2. <Operator>
    3. <GSM signal>
    4. <Roaming>
    5. <Plane mode>
<Type of information>: Integer
Requested information:
networkAirPlaneModeManagement of plane mode.
If this information is requested, <Result> is set to:
  • "1" if the device is in airplane mode.
  • "0" otherwise.
Universal Windows 10 App This constant is not available.
networkGSMSignalGSM signal strength between "0" (no signal) and "100" (optimal signal).
networkOperatorName of the network operator used.
Depending on the type of network or if the plane mode is enabled, this information may not be specified.
If no SIM card is found, this information may correspond to an operator name if the phone is "Sim-locked".
networkRoamingData roaming mode.
If this information is requested, <Result> is set to:
  • "1" if the current connection uses data roaming
  • "0" otherwise.
networkTypeType of network used to access the data on the mobile network.
Data roaming mode.
If this information is requested, <Result> is set to:
  • network2G: 2G network
  • networkEdge: Edge network
  • network3G: 3G network
  • network4G: 4G network
  • network5G: 5G network
  • networkUnknown: Unknown network (or SIM card not found).

WiFi connection information

To get information about the WiFi connection, use WiFiConnectionInfo.
Related Examples:
WM System Cross-platform examples (WINDEV Mobile): WM System
[ + ] This application is an example of some of the features of WINDEV Mobile available for Android/iOS.
The following system functions are used:
- Multimedia control
- Brightness
- Volume
- Wi-Fi
- Bluetooth
- Toast
- Compass
- Accelerometer
- Camera control
- Vibration
- Notifications
- Drawing functions
- Internet
Component: wd270android.aar
Minimum version required
  • Version 17
This page is also available for…
Click [Add] to post a comment