|
|
|
|
BurnerList (Function) In french: GraveurListe Returns the list of burners installed on the current computer. Remarks: - BurnerSelect is used to select the default burner.
- BurnerPath is used to find out the drive associated with the current burner.
// Find out the burners installed ListBurner is string ListBurner = BurnerList() IF ListBurner ~= "" THEN Error("No burner was detected on the computer") RETURN END // To view the entire example, click the "Examples" link
Syntax
<Result> = BurnerList([<Details>])
<Result>: Character string List of burners installed on the current computer, in the following format:- detailed list (if the <Details> parameter corresponds to True):
<Identifier of Burner 1> + TAB + <Make of Burner 1> + TAB + <Model of Burner 1> + TAB + <Firmware of Burner 1> + CR + ... <Identifier of Burner N> + TAB + <Make of Burner N> + TAB + <Model of Burner N> + TAB + <Firmware of Burner N> - non-detailed list (if the <Details> parameter corresponds to False):
<Identifier of Burner 1> + CR + ... + <Identifier of Burner N> Where: - <Identifier of Burner 1> ... <Identifier of Burner N> correspond to the identifiers of the burners.
- <Make of Burner 1> ... <Make of Burner N> correspond to the make of the burners.
- <Model of Burner 1> ... <Model of Burner N> correspond to the model of the burners.
- <Firmware of Burner 1> ... <Firmware of Burner N> correspond to the "firmware" of the burners.
<Details>: Optional boolean - True to list the detailed information about the burners,
- False (by default) to list the identifiers of the burners.
This page is also available for…
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|