PC SOFT

ONLINE HELP
 WINDEV, WEBDEV AND WINDEV MOBILE
  • Configuring the display of projections
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadIOS WidgetApple WatchMac CatalystUniversal Windows 10 App
Others
Stored procedures
Indicates whether the points found in a series of a 3D Scatter chart must be be projected on a given plane. In this case, a straight line will link the point to its projection on the corresponding plan.
Example
// Projects in dots the points of series 1 on XY plane
CHART_My3DScatter.Scatter3DProjection(1, grPlaneXY, LineDotted)
// Initialize the Combo Box control
// Fills the list of line types
ListAdd(MySelf, "No line" + gStoredValue(LineNone))
ListAdd(MySelf, "Solid line" + gStoredValue(LineSolid))
ListAdd(MySelf, "Dashed line" + gStoredValue(LineDash))
ListAdd(MySelf, "Dotted line" + gStoredValue(LineDotted))
ListAdd(MySelf, "Dot-and-dash line" + gStoredValue(LineDotAndDash))
 
// By default, a dot-and-dash line is applied to this plane
MySelf = LineDotAndDash
 
// -----------------------------------------------------
// Code for selecting a row in the Combo Box control
 
// Applies the type of projection for the XY plane
CHART_Chart.Scatter3DProjection(1, grPlaneXY, MySelf)
CHART_Chart.Draw()
Syntax
<Chart control>.Scatter3DProjection(<Series number> , <Projection plane> [, <Type of line>])
<Chart control>: Control name
Name of the Chart control to use (in the window editor).
<Series number>: Integer
Number of the series to use.
<Projection plane>: Integer constant
Plane onto which the points will be projected:
grPlaneXYXY plane.
grPlaneXZXZ plane.
grPlaneYZYZ plane.
<Type of line>: Optional Integer constant
Type of line used to see the projection:
LineDashLine with dashes (------).
LineDotAndDashLine mixing dots and dashes (.-.-.-).
LineDottedDotted line (........).
LineNoneNo line is drawn.
LineSolid
(Default value)		Solid line.
Remarks

Configuring the display of projections

The projections are visible by default. The display of projections can be configured with <Chart>.Parameter.
You can:
  • hide the projections.
    CHART_My3DScatter.Parameter(grProjectionScatter3D, grProjectionNone)
  • always display the projections.
    CHART_MyScatter3D.Parameter(grProjectionScatter3D, grProjectionAlwaysVisible)
  • display the projections during the click on the point.
    CHART_My3DScatter.Parameter(grProjectionScatter3D,grProjectionClick)
Component: wd270grf.dll
See also
Minimum version required
  • Version 23
This page is also available for…
Comments
Click [Add] to post a comment