ONLINE HELP
 WINDEVWEBDEV AND WINDEV MOBILE

Help / WLanguage / WLanguage functions / Communication / Net functions
  • Errors
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadIOS WidgetApple WatchMac CatalystUniversal Windows 10 App
Others
Stored procedures
Warning
From version 2024, this feature is no longer available.
Returns the error message corresponding to the error number returned by NetOpenRemoteAccess and NetCloseRemoteAccess.
Example
OpeningReport is int = NetOpenRemoteAccess("MyConnection")
IF OpeningReport = 0 THEN
...
NetCloseRemoteAccess()
ELSE
Error("Error during the connection", NetMsgError(OpeningReport))
END
Syntax
<Result> = NetMsgError(<Error number>)
<Result>: Character string
Message of the error (see the Notes).
<Error number>: Integer
Error number, returned by NetOpenRemoteAccess and NetCloseRemoteAccess.
Remarks

Errors

The error messages that can occur are as follows:
599: The RASAPI32.DLL file is not found. Check the configuration of the remote access.600: An operation is pending.
601: The port handle is invalid.602: The port is already open.
603: Buffer too small.604: Wrong information specified.
605: Cannot set port information.606: The port is not connected.
607: Invalid event.608: The modem does not exist
609: The type of modem does not exist.610: The buffer is invalid.
611: The route is not available.612: The route is not allocated.
613: Invalid compression.614: Out of buffers.
615: The port was not found.616: An asynchronous request is pending.
617: The port or device is already disconnecting.618: The port is not open.
619: The port is disconnected.620: There are no endpoints.
621: Cannot open the phone book file.622: Cannot load the phone book file.
623: Cannot find the phone book entry.624: Cannot write the phone book file.
625: Invalid information found in the phone book.626: Cannot load a string.
627: Cannot find key.628: The port is disconnected.
629: The port was disconnected by the remote machine.630: The port was disconnected due to hardware failure.
631: The port was disconnected by the user.632: Invalid structure size.
633: The port is already in use or is not configured for Remote Access dialout.634: Cannot register your computer on the remote network.
635: Unknown error.636: The wrong device is attached to the port.
637: The string could not be converted.638: The request has timed out.
639: No asynchronous net available.640: A NetBIOS error has occurred.
641: The server cannot allocate NetBIOS resources needed to support the client.642: One of your NetBIOS names is already registered on the remote network.
643: Failure of a server network adapter.644: You will not receive network message popups.
645: Authentication error.646: The account is not permitted to log on at this time of day.
647: The account is disabled.648: The password has expired.
649: The account does not have Remote Access permission.650: The Remote Access server is not responding.
651: Your modem (or other connecting device) has reported an error652: Unrecognized response from the device.
653: A macro required by the device was not found in the device .INF file section.654: A command or response in the device .INF file section refers to an undefined macro.
655: The <message> macro was not found in the device.INF file section.656: The <defaultoff> macro of the .INF file of the modem is not defined.
657: Unable to open the .INF file of the modem.658: The name of the modem in the .INF file of the modem or in the .INI file of the media is too long.
659: The media .INI file refers to an unknown device name.660: The device .INF file contains no responses for the command.
661: The device .INF file is missing a command662: Attempted to set a macro not listed in device .INF file section.
663: The media .INI file refers to an unknown device type.664: Cannot allocate memory.
665: The port is not configured for the remote access.666: Your modem (or other connecting device) is not functioning.
667: Cannot read the media .INI file668: The connection dropped.
669: The usage parameter in the media .INI file is invalid.670: Cannot read the section name from the media .INI file.
671: Cannot read the device type from the media .INI file.672: Unable to read the name of the modem in the .INI file of media.
673: Cannot read the usage from the media .INI file.674: Unable to read the maximum transfer rate in the .INI file of the media.
675: Cannot read the maximum carrier BPS rate from the media .INI file.676: The line is busy.
677: A person answered instead of a modem.678: There is no answer.
679: Cannot detect carrier.680: No dial tone.
681: General error reported by device.682: Error writing section name to the media .INI file.
683: Error writing device type to the media .INI file.684: Error writing device name to the media .INI file.
685: Error writing usage to the media .INI file.686: Error writing maximum connection BPS rate to the media .INI file.
687: Error writing maximum carrier BPS rate to the media .INI file.688: Unable to write into the <defaultoff> macro.
689: Unable to read in the <defaultoff> macro.690: Empty .INI file.
691: Access denied. Invalid username or password.692: Hardware failure in port or attached device.
698: Invalid format for response key name in the .INF file of the modem.699: The device response caused buffer overflow.
700: The expanded command in the device .INF file is too long.701: The device moved to a BPS rate not supported by the COM driver.
702: Unexpected response.707: X.25 diagnostic indication.
708: The account has expired.709: Error while changing the password on the domain. The password is too small or it is already used.
710: Serial overrun errors were detected while communicating with your modem.711: RasMan initialization failure.
712: Biplex initialization of the port. Wait a few seconds and redial.713: No active ISDN lines are available.
714: Not enough ISDN channels are available.715: Too many errors occurred because of poor phone line quality.
716: The Remote Access IP configuration is unusable.717: No IP address is available.
718: PPP timeout.719: PPP terminated by remote machine.
720: No PPP control protocols configured.721: Remote PPP peer is not responding.
722: The PPP packet is invalid.723: The phone number is too long.
724: The IPX protocol cannot dial-out.725: The IPX protocol cannot dial-in
726: The IPX protocol cannot be used for dial-out on more than one port at a time.727: Cannot access TCPCFG.DLL.
728: Cannot find an IP adapter bound to Remote Access.730: SLIP cannot be used unless the IP protocol is installed.
731: Computer registration is not complete.732: The protocol is not configured.
733: The PPP negotiation failed.734: PPP is not available on the server.
735: PPP error.736: The requested address was rejected by the server.
737: The remote computer has ended the control protocol.738: Loop detected.
739: The server has no address.740: The authentication protocol requested by the remote server cannot use the encrypted password of Windows NT. Uncheck the Authentication option for the username and password for this connection and re-establish the connection.
741: Invalid TAPI configuration.742: The local computer does not support encryption.
743: The remote server does not support encryption.744: The remote server requires encryption.
745: Cannot use the IPX net number.
Component: wd290com.dll
Minimum version required
  • Version 9
This page is also available for…
Comments
Click [Add] to post a comment

Last update: 01/09/2024

Send a report | Local help