PC SOFT

WINDEVWEBDEV AND WINDEV MOBILE
ONLINE HELP

Home | Sign in | English UK
  • Required configuration
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadApple WatchUniversal Windows 10 AppWindows Mobile
Others
Stored procedures
tapiStop (Function)
In french: telArrête
Forces the reading of a pre-recorded message to stop (tapiPlay).
Example
PROCEDURE CallDetection(nServiceID, nCallID, nStatus)
// Picks up the line to answer a call
tapiAnswerCall(nCallID)

// Trigger the answerphone
tapiPlay("answerphone.wav", tapiPlayLock, nCallID)

// If the star key was pressed
// the answerphone is stopped
IF Position(tapiKeyPressed(nCallID), "*") = 1 THEN
tapiStop(nCallID)
END
Syntax
tapiStop([<Call identifier>])
<Call identifier>: Optional integer
Identifier of the call to handle. This identifier is defined in the WLanguage procedure called by tapiListen. The current call is handled if this parameter is not specified.
Remarks
WINDEVUser code (UMC)

Required configuration

The telephony functions are using the TAPI 2.0 technology. This technology can be used on all the systems.
However, if the system used is Windows NT4, the service pack 4 (or later) must be installed.
Note: The TAPI 3.0 technology (and later) is not supported in this version.
Telephony functions use TAPI 2.0 technology and/or TAPI 3.1 technology. These technologies can be used on all systems.
Versions 24 and later
TAPI 3.1 technology is now supported.
New in version 24
TAPI 3.1 technology is now supported.
TAPI 3.1 technology is now supported.
Component : wd250com.dll
Minimum version required
  • Version 9
This page is also available for…
Comments
Click [Add] to post a comment