ONLINE HELP
 WINDEVWEBDEV AND WINDEV MOBILE

Help / Developing an application or website / Controls, windows and pages / Controls: Available types / Word Processing control
  • Overview
  • Properties available in a window
WINDEV
WindowsLinuxUniversal Windows 10 AppJavaReports and QueriesUser code (UMC)
WEBDEV
WindowsLinuxPHPWEBDEV - Browser code
WINDEV Mobile
AndroidAndroid Widget iPhone/iPadIOS WidgetApple WatchMac CatalystUniversal Windows 10 App
Others
Stored procedures
Word Processing control properties
Overview
You can manipulate Word Processing controls in a window using the following WLanguage properties.
Properties available in a window
The following properties are associated with Word Procesing controls:
AccessibilityThe Accessibility property gets and sets the accessibility properties of a control.
AnchorThe Anchor property sets the anchors of a control in a window, page or report.
AnchorRateBottomThe AnchorRateBottom property is used to:
  • Find out the anchor rate when a control moves on the vertical axis.
  • Modify the anchor rate when a control moves on the vertical axis.
AnchorRateHeightThe AnchorRateHeight property is used to:
  • Find out the vertical anchor rate of a control.
  • Modify the vertical anchor rate of a control.
AnchorRateRightThe AnchorRateRight property is used to:
  • Find out the anchor rate when a control moves on the horizontal axis.
  • Modify the anchor rate when a control moves on the horizontal axis.
AnchorRateWidthThe AnchorRateWidth property is used to:
  • Find out the anchor rate when a control (or a table column) stretches on the horizontal axis.
  • Modify the anchor rate when a control (or a table column) stretches on the horizontal axis.
AutoCorrectThe AutoCorrect property allows you to define a set of automatic corrections to be applied in a Word Processing control as the user types.
AutomaticLinkThe AutomaticLink property is used to:
  • determine if the automatic link detection mode is enabled,
  • enable or disable the automatic link detection mode.
CheckSpellThe CheckSpell property is used to enable or disable the automatic spelling checker.
CursorThe Cursor property gets and sets the position of the mouse cursor in one of the following controls:
  • Edit control.
  • Editable Combo Box.
  • "Edit control" table column and "Editable Combo Box" table column.
  • Word Processing control.
  • HTML Editor control.
  • Code Editor control.
CursorEndThe CursorEnd property gets and sets the end position of the mouse selection range in the following controls:
  • Edit control.
  • Editable Combo Box.
  • "Edit control" column and "Editable Combo Box" column in a Table control.
  • Word Processing control.
  • Code Editor control.
DataBindingThe DataBinding property is used to identify and change the binding between a control and:
  • an item in a data file.
  • a variable.
  • several variables.
DefaultFilePathThe DefaultFilePath property gets and sets the full file name (path and file name) suggested by default when saving a document in a Word Processing or HTML Editor control via the "Save as" option.
DisplayBookmarksThe DisplayBookmarks property is used to:
  • identify the display mode of bookmarks in a Word Processing control.
  • show or hide bookmarks in a Word Processing control.
DisplayEnabledThe DisplayEnabled property is used to:
  • determine whether or not a control or window is refreshed. If the control is displayed, its content is refreshed regularly.
  • refresh a control or window.
DisplayFormattingMarksThe DisplayFormattingMarks property is used to:
  • Determine if formatting marks are shown or hidden in a Word Processing control.
  • Show or hide formatting marks in a Word Processing control.
DisplayModeThe DisplayMode property gets and changes:
  • the display mode in a Word Processing control,
  • the display mode in a PDF Reader control
  • the display mode in an HTML Editor control,
  • the display mode in a Kanban control
EmptyThe Empty property is used to determine if:
  • a Looper, Table, List Box or Combo Box control is empty. The control can be a browsing control or a memory control.
  • a Chart control contains no series.
  • a report control is empty (control linked to an item).
  • an array (or an associative array) contains no element.
  • an element of an associative array exists or not.
  • a queue, a list or a stack contains no element.
ExtraThe Extra property is used to:
  • Get additional information about a control, window, or page.
  • Edit additional information of a control, window or page.
FilePathThe FilePath property gets:
  • the name of the xlsx file associated with a Spreadsheet control.
  • the name of the file associated with an Image Editor control.
  • the name of the PDF file associated with a PDF Reader control.
  • the name of the DOCX file associated with a Word Processing control.
  • the name of the wddiag file associated with a Diagram Editor control.
FlexAlignSelfThe FlexAlignSelf property gets and sets the alignment of an item along the cross axis of a Flexbox control (corresponding CSS property: "align-self").
FlexGrowThe FlexGrow property gets and sets the grow factor of an item in a line of a Flexbox control.
FlexShrinkThe FlexShrink property gets and sets the shrink factor of an item in a line of a Flexbox control.
FormattingMarksColorThe FormattingMarksColor property is used to:
  • get the color of the formatting marks in a Word Processing control.
  • change the color of the formatting marks in a Word Processing control.
FullNameThe FullName property is used to find out the full name:
  • of a control.
  • of a window.
  • of a menu option.
  • of a table column.
GrayedThe Grayed property is used to:
  • Determine if a control (or a group of controls) is grayed out.
  • Gray out or ungray a control, a group of controls or a window.
GroupThe Group property is used to:
  • find out whether the control belongs to a group of controls. If the control belongs to one or more groups, the Group property can be used to identify these groups of controls.
  • associate a control with a group of controls.
HeightThe Height property is used to get and change the height:
  • of a control or block in a report.
  • of a control (in a window), window, row of a Table, List Box or ListView control, option of a Radio Button or Check Box control, break header or footer of a Table or Looper control.
  • of a control (in a page), break header or footer in a Table or Looper control. The control can be overlayable or not.
  • of a break cell in a Table or Looper control.
HideWhileScrollingThe HideWhileScrolling property is used to:
  • Determine if the pinned control is hidden while scrolling,
  • Show or hide the pinned control while scrolling.
HTMLEditThe HTMLEdit property is used to:
  • find out whether a Word Processing control is displayed in optimized mode for HTML editing,
  • modify a Word Processing control to display it (or not) in optimized mode for HTML editing.
InitialHeightThe InitialHeight property is used to:
  • Find out the creation height of a control or window.
  • Modify the base height used to anchor the controls "in height".
  • Find out the creation height of a block or control in a report.
InitialStateThe InitialState property gets the initial state of a control.
InitialValueThe InitialValue property is used to get the initial value of a control in a window or page.
InitialVisibleThe InitialVisible property is used to determine if:
  • a control was visible during the first display of the associated window or page.
  • a window was visible during its first display.
InitialWidthThe InitialWidth property is used to:
  • Find out the initial width of a control or window.
  • Modify the base width used to anchor the controls in "width".
  • Find out the initial width of a report control.
InputEnabledThe InputEnabled property is used to:
  • Determine if a control or a group of controls is editable or read-only.
  • Change the input options for a control or group of controls.
MaxHeightThe MaxHeight property is used to get and change the maximum height of a control or window.
MaxWidthThe MaxWidth property is used to get and change the maximum width of a control or window.
MinHeightThe MinHeight property is used to get and change the minimum height of a control or window.
MinWidthThe MinWidth property is used to get and change the minimum width of a control or window.
ModifiedThe Modified property is used to determine if a control or group of controls has been modified by the user (keyboard or mouse input).
NameThe Name property is used to get:
  • the name of the font associated with a Font variable.
  • the name of a control, report or report block.
  • the name of a control, group of controls or window.
  • the name of a control, group of controls or page.
NewLineThe NewLine property is used to determine:
  • in a Table control, whether the current row was created with TableAddXXX or TableInsertXXX.
  • in a Looper control, whether the current row was created with LooperAddXXX or LooperInsertXXX.
  • in an Organizer control, whether an appointment was created via the popup menu.
  • in a Scheduler control, whether an appointment was created via the popup menu.
NoteThe Note property is used to:
  • Find out the notes associated with a control, a window, a page or a report.
  • Modify the notes associated with a control, a window a page or a report.
NoteTitleThe NoteTitle property is used to:
  • Get the title of the notes used in the technical documentation of a control, window, page or report.
  • Change the title of the notes used in the technical documentation of a control, window, page or report.
NumberAccessiblePagesThe NumberAccessiblePages property is used to get the number of pages currently loaded in a PDF Reader or Word Processing control.
NumberDisplayedPageThe NumberDisplayedPage property is used to identify and change the number of the page currently displayed in the PDF Reader or Word Processing control.
NumberPageThe NumberPage property is used to get:
  • the number of pages in a "multi-page" image file. This image is displayed in an Image control or in the background of a Chart control.
  • the number of pages in a PDF file displayed in an Image control.
  • the number of pages found in a PDF file displayed in a PDF Reader control.
  • the number of pages found in a DOCX file displayed in a Word Processing control.
PaneThe Pane property is used to:
  • Find out the pane tabs associated with a control.
  • Define the pane tabs associated with a control.
PinnedThe Pinned property is used to:
  • Pin a control: the position of the pinned control will be relative to the visible area of its container and not to the content area.
  • Determine if a control is pinned.
PlaneThe Plane property is used to:
  • Get:
    • the active plane of a window (or report) or the plane to which a control belongs.
    • the active plane of a WEBDEV element.
  • Change:
    • the active plane of a window (or report) or associate a control with another plane.
    • the active plane of a WEBDEV element.
ProcessThe Process property is used to modify the processes to be executed by the events available on a control, window, page, report, etc.
RibbonThe Ribbon property is used to access the Ribbon control of the associated control (Word Processing, PDF Reader, Spreadsheet, Image Editor, HTML Editor or Diagram Editor controls).
RuleVisibleThe RuleVisible property is used to:
  • Find out whether the rulers are visible or invisible in a Word Processing control.
  • Make the rulers visible or invisible in a Word Processing control.
SelectionThe Selection property is used to get the characteristics of the selection (or cursor):
  • in a Word Processing control.
    Remark: This selection is in the section being edited in the control (body, header or footer).
  • in a Spreadsheet control.
  • in an HTML Editor control.
  • in a Diagram Editor control.
SelectionDirectionThe SelectionDirection property is used to determine and change the selection direction (left to right or right to left) in a Word Processing control.
SelectionLengthThe SelectionLength property is used to get and change the length of the selection made in a Word Processing control.
StateThe State property gets and sets the state of an element.
TABOrderThe TABOrder property gets and sets the position of a control in the tab order of a window.
ToolbarVisibleThe ToolbarVisible property is used to:
  • determine if the toolbar or the ribbon is displayed in a control.
  • show or hide the toolbar or the ribbon in a control.
TypeThe Type property is used to get:
  • the type of element (data file or item) defined programmatically or in the data model editor, view or query.
  • the type of object.
  • the type of data held in a Variant.
ValueThe Value property is used to:
  • Find out and modify the value of a report control.
  • Find out and modify the value of a control or the title of a window.
  • Find out the identifier of a stream.
  • Find out and modify the value of a control or the title of a page.
VisibleThe Visible property is used to:
  • Find out whether an element is visible.
  • Make an element visible or invisible.
VisibleWithAnimationThe VisibleWithAnimation property is used to make a control visible or invisible via the "Appear/Disappear" animation.
WidthThe Width property gets and changes the width:
  • of a control or block in a report.
  • of a control (found in a window), window, column found in a table or column found in a list box (including listview).
  • of a control (found in a page), column found in a table or column found in a list box. The control can be overlayable or not.
XThe X property is used to:
  • Get the X-coordinate of a control, Table control column or window (position on the X-axis).
  • Get the X-coordinate of a control or window (position on the X-axis).
XInitialThe XInitial property is used to:
  • Get the X-coordinate:
    • of a control (position on the X-axis) when opening the window or the page.
    • of a window (position on X-axis) when opening the window.
  • Change the X-coordinate of a control anchored "to the right" (position on the X-axis) when opening the window.
  • Get the X-coordinate of a control in relation to its block (position in millimeters on the X-axis) when opening the report.
YThe Y property is used to:
  • Find out the Y-coordinate of a control or window (position on Y-axis).
  • Modify the Y-coordinate of a control or window.
YInitialThe YInitial property is used to:
  • Find out the Y-coordinate:
    • of a control (position on Y-axis) when opening the window or the page.
    • of a window (position on Y-axis) when opening the window.
  • Modify the Y-coordinate of a control anchored "to bottom" (position on the vertical axis) when opening the window.
  • Find out the Y-coordinate of a control in relation to its block (position in millimeters on the vertical axis) when opening the report.
ZoomThe Zoom property gets or sets the zoom value:
  • in an Image control.
  • in a Map control.
  • in an Organization Chart control.
  • in a Table, TreeView Table, Pivot Table, Spreadsheet or List Box control.
  • in a Word Processing control.
  • in a PDF Reader control.
  • in a Camera control.
  • in a Diagram Editor control;
  • in a window.
ZOrderThe ZOrder property defines the Z-order of an element.
Minimum version required
  • Version 22
Comments
Click [Add] to post a comment

Last update: 07/10/2024

Send a report | Local help